30ft Biomass Fuel Store Container Case Study
Lion Containers (Fabrications) Ltd recently supplied a 30ft cut down non-iso container; painted green and converted into a biomass fuel store and boiler room. 

30ft Fuel Store Specification
  • Double personnel door (1894mm x 2065mm), anti vandal with 12 point locking system.
  • Steel bulkhead partition, which was ply lined and formed the fuel store and boiler room.
  • 12 inch port hole opening and closing window within partition, and a 800 x 800 access hatch.
  • 7ft x 8ft section of roof was removed, and a sliding roof hatch fab and installed (see video).
  • An area of the chip store was ply lined and the floor was raised by 480mm.
  • Two 300 x 300 louvred vents were supplied in the boiler houing end in the cargo doors.
  • An aperture was cut into the steel bulkhead for the agitator arm, this was 300mm above the raised floor in the fuel store.
  • Fuel inlet pipe apertures were cut out.
  • Unit was painted green.
Fill out my online form.